Mini-gripper has radial action fingers that simultaneously open 45 degrees from their closed position. The double acting cylinder requires air pressure to open and close the gripper fingers.

These radial action grippers allow both fingers to simultaneously open 90 degrees from their closed position. They reach their maximum gripping force at the extreme open and closed position. Due to the toggle design and double acting cylinders, the grippers mechanically lock in the full closed position.

Grippers have large toggle type mechanisms with externally mounted fingers for attaching tooling for either internal or external part gripping applications. Grip force is determined by relation of tooling to toggle pivot points and part to be gripped. By choosing the mounting surface, the highest grip force is attained.

Steel fingers are drilled and tapped for your tooling. Gripper body is anodized aluminum.

Mini-Gripper has parallel motion fingers with a double acting air cylinder requiring pressure to open and close. Gripper fingers remain parallel throughout the finger travel.

Steel fingers are ready for your tooling. Gripper body is anodized aluminum.

These true parallel grippers have large tooling mounting pads with a high force to weight ratio. The double acting cylinder requires air pressure to open and close the gripper fingers.

Tool mounting pads are drilled and tapped for your tooling. Gripper body and tool mounting pads are anodized aluminum.

Heavy duty grippers have true parallel motion and are recommended for loads up to 200 lbs.

Tool mounting pads are drilled and tapped for your tooling. Gripper body is anodized aluminum.